Cisco VG204 Software Configuration Guide

4-9
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4 Configuring Voice
Configuring the Voice Interface for Cisco CallManager
Step 9
timeouts interdigit seconds
Example:
VG(config)# timeouts interdigit 60
Configures the interdigit timeout value for a specified
voice port.
Step 10
timeouts ringing seconds infinity
Example:
VG(config)# timeouts ringing infinity
Configures the timeout value for ringing.
Step 11
voice-port slot-number/port
Example:
VG(config)# voice-port 0/1
VG(config)# voice-port 0/2
VG(config)# voice-port 0/3
Enters voice-port configuration mode.
Step 12
ccm-manager fax protocol [protocol cisco]
Example:
VG(config)# ccm-manager fax protocol cisco
Enables fax-relay protocol for endpoints on a gateway.
Step 13
ccm-manager config [server] ip-address name
Example:
VG(config)# ccm-manager config server 9.13.38.245
Specifies the TFTP server from which the voice gateway
downloads Cisco CallManager XML configuration files
and enables the download of the configuration.
Step 14
ccm-manager sccp local interface-type
interface-number
Example:
VG(config)# ccm-manager sccp local fastethernet
0/0
Selects the local interface that the SCCP application uses
to register with Cisco CallManager.
Step 15
ccm-manager sccp
Example:
VG(config)# ccm-manager sccp
Enables Cisco CallManager autoconfiguration of the
Cisco IOS gateway.
Step 16
sccp local interface-type interface-number port
port-type
Example:
VG(config)# sccp local fastethernet 0/0
Selects the local interface that SCCP applications
(transcoding and conferencing) use to register with Cisco
CallManager.
Step 17
sccp
Example:
VG(config)# sccp
Enables SCCP protocol and its related applications
(transcoding and conferencing).
Step 18
sccp ccm group group-number
Example:
VG(config)# sccp ccm group 1
Creates a Cisco CallManager group and enters SCCP
Cisco CallManager configuration mode.
Command or Action Purpose

Cisco VG204 Specifications

General

Number of FXS Ports	4
Voice Codecs	G.711, G.729, G.729a, G.729ab
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Network Interface	1 x 10/100 Ethernet
Protocol Support	SCCP, SIP
Power Supply	AC 100-240V, 50-60Hz
Weight	2.2 lbs (1 kg)
Storage Temperature	-20 to 70°C