Cisco VG204 Software Configuration Guide

4-8
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4 Configuring Voice
Configuring the Voice Interface for Cisco CallManager
17. sccp
18. sccp ccm group group-number
19. associate ccm identifier-number priority priority-number
20. dial-peer voice tags pots
21. service stcapp
22. port port-number
23. exit
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
VG# enable
Enters privileged EXEC mode.
Step 2
configure terminal
Example:
VG# configure terminal
Enters global configuration mode. You have entered
global configuration mode when the prompt changes to
VG(config)#.
Step 3
stcapp ccm-group group-id
Example:
VG(config)# stcapp ccm-group 1
Configures the Cisco CallManager group number for use
by the SCCP Telephony Control Application (STCAPP).
Step 4
stcapp
Example:
VG(config)# stcapp
Enables STCAPP.
Step 5
stcapp feature access-code
Example:
VG(config)# stcapp feature access-code
Enables STC application feature access codes and enters
their configuration mode.
Step 6
stcapp feature speed-dial
Example:
VG(config)# stcapp feature speed-dial
Enables STC application feature speed-dial codes and
enters their configuration mode.
Step 7
voice-port slot-number/port
Example:
VG(config)# voice-port 0/0
Enters voice-port configuration mode.
Step 8
timeouts initial seconds
Example:
VG(config-voiceport)# timeouts initial 60
Configures the initial digit timeout value for a specified
voice port.

Cisco VG204 Specifications

General

Number of FXS Ports	4
Voice Codecs	G.711, G.729, G.729a, G.729ab
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Network Interface	1 x 10/100 Ethernet
Protocol Support	SCCP, SIP
Power Supply	AC 100-240V, 50-60Hz
Weight	2.2 lbs (1 kg)
Storage Temperature	-20 to 70°C