Cisco VG204 - Entering; Exiting

Contents
iv
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Auto-Configuration With a DHCP Server 4-4
Auto-Configuration Without a DHCP Server 4-5
Configuring the Voice Interface for Cisco CallManager 4-7
Configuring the MAC Address Convention 4-10
Configuring Calls 4-11
Call Transfer 4-11
Call Waiting 4-12
Three-Party Conferencing 4-12
Call ID 4-12
APPENDIX A Using the ROM Monitor A-1
Entering the ROM Monitor Mode A-1
ROM Monitor Commands A-2
Command Descriptions A-3
Recovering Boot and System Images A-4
Using the xmodem Command A-4
Configuration Register A-4
Changing the Configuration Register Manually A-5
Changing the Configuration Register Using Prompts A-5
Console Download A-6
Command Description A-6
Error Reporting A-7
Debug Commands A-7
Exiting the ROM Monitor A-8
I NDEX