vi
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Preface
Document Organization
The following table summarizes major sections of this document.
Related and Referenced Documents
The documents described here are available online. To be sure of obtaining the latest information, you
should access the online documentation.
To print a document in its original page format, access the online document, and click the PDF icon.
You can also order printed copies of documents. See the “Obtaining Documentation and Submitting a
Service Request” section on page vi.
To Access Online User Documentation (PDF and HTML Formats)
From Cisco.com at http://www.cisco.com, under Documentation, select Voice and Unified
Communications, select Voice G a t ewa y, select Cisco VG200 Series Gateways.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s
New in Cisco Product Documentation, which also lists all new and
revised Cisco
technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.
Chapter Title Description
Chapter 1 Understanding Interface
Numbering and Cisco IOS
Software Basics
Provides an overview of the interface numbering
conventions for the Cisco VG202 and Cisco VG204
voice gateways. Also provides a basic understanding of
Cisco IOS software.
Chapter 2 Using the setup Command
Facility
Describes how to use the setup command facility to
configure your voice gateway.
Chapter 3 Configuring with the
Command-Line Interface
Describes how to use the Cisco IOS software
command-line interface (CLI) to configure basic voice
gateway functionality.
Chapter 4 Configuring Voice Describes how to configure voice gateway foreign
exchange station (FXS) interfaces for your gateway.
Appendix A Using the ROM Monitor Provides configuration example for the Cisco VG202
and Cisco VG204 voice gateways.
To Next Page
Loading...
Need help?
General
