Cisco VG204 - Page 40

4-14
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4 Configuring Voice
Configuring Calls
Step 5
voice-port slot-number/port
Example:
VG(config)# voice-port 0/1
Enters voice-port configuration mode.
Step 6
caller-id enable [type [1|2]]
Example:
VG(config-voice-port)# caller-id enable type 2
Allows the sending or receiving of caller-ID information.
Step 7
exit
Example:
VG(config)# exit
Exits to global configuration mode.
Command or Action Purpose