Contents
x
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Setting Up the Switch to Run SSH 9-39
Configuring the SSH Server 9-40
Displaying the SSH Configuration and Status 9-41
CHAPTER
10 Configuring 802.1x Port-Based Authentication 10-1
Understanding 802.1x Port-Based Authentication 10-1
Device Roles 10-2
Authentication Initiation and Message Exchange 10-3
Ports in Authorized and Unauthorized States 10-4
802.1x Accounting 10-5
Supported Topologies 10-5
Using 802.1x with Port Security 10-6
Using 802.1x with Voice VLAN Ports 10-7
Using 802.1x with VLAN Assignment 10-7
Using 802.1x with Guest VLAN 10-8
Using 802.1x with Per-User ACLs 10-9
802.1x and Switch Stacks 10-10
Configuring 802.1x Authentication 10-10
Default 802.1x Configuration 10-11
802.1x Configuration Guidelines 10-12
Upgrading from a Previous Software Release 10-13
Configuring 802.1x Authentication 10-13
Configuring the Switch-to-RADIUS-Server Communication 10-15
Configuring Periodic Re-Authentication 10-16
Manually Re-Authenticating a Client Connected to a Port 10-16
Changing the Quiet Period 10-17
Changing the Switch-to-Client Retransmission Time 10-17
Setting the Switch-to-Client Frame-Retransmission Number 10-18
Setting the Re-Authentication Number 10-18
Configuring the Host Mode 10-19
Configuring a Guest VLAN 10-20
Resetting the 802.1x Configuration to the Default Values 10-21
Configuring 802.1x Accounting 10-21
Displaying 802.1x Statistics and Status 10-22
CHAPTER
11 Configuring Interface Characteristics 11-1
Understanding Interface Types 11-1
Port-Based VLANs 11-2
Switch Ports 11-2