Contents
xxii
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Setting the Message Display Destination Device 29-5
Synchronizing Log Messages 29-6
Enabling and Disabling Time Stamps on Log Messages 29-7
Enabling and Disabling Sequence Numbers in Log Messages 29-8
Defining the Message Severity Level 29-9
Limiting Syslog Messages Sent to the History Table and to SNMP 29-10
Configuring UNIX Syslog Servers 29-11
Logging Messages to a UNIX Syslog Daemon 29-11
Configuring the UNIX System Logging Facility 29-12
Displaying the Logging Configuration 29-13
CHAPTER
30 Configuring SNMP 30-1
Understanding SNMP 30-1
SNMP Versions 30-2
SNMP Manager Functions 30-3
SNMP Agent Functions 30-4
SNMP Community Strings 30-4
Using SNMP to Access MIB Variables 30-5
SNMP Notifications 30-5
SNMP ifIndex MIB Object Values 30-6
Configuring SNMP 30-6
Default SNMP Configuration 30-7
SNMP Configuration Guidelines 30-7
Disabling the SNMP Agent 30-8
Configuring Community Strings 30-8
Configuring SNMP Groups and Users 30-10
Configuring SNMP Notifications 30-12
Setting the Agent Contact and Location Information 30-15
Limiting TFTP Servers Used Through SNMP 30-16
SNMP Examples 30-16
Displaying SNMP Status 30-17
CHAPTER
31 Configuring Network Security with ACLs 31-1
Understanding ACLs 31-1
Supported ACLs 31-2
Port ACLs 31-3
Router ACLs 31-4
VLAN Maps 31-4
Handling Fragmented and Unfragmented Traffic 31-5
To Next Page
Loading...
