Contents
xxiii
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
ACLs and Switch Stacks 31-6
Configuring IP ACLs 31-6
Creating Standard and Extended IP ACLs 31-7
Access List Numbers 31-7
Creating a Numbered Standard ACL 31-9
Creating a Numbered Extended ACL 31-11
Resequencing ACEs in an ACL 31-15
Creating Named Standard and Extended ACLs 31-15
Using Time Ranges with ACLs 31-17
Including Comments in ACLs 31-19
Applying an IP ACL to a Terminal Line 31-19
Applying an IP ACL to an Interface 31-20
Hardware and Software Treatment of IP ACLs 31-22
IP ACL Configuration Examples 31-22
Numbered ACLs 31-24
Extended ACLs 31-24
Named ACLs 31-24
Time Range Applied to an IP ACL 31-25
Commented IP ACL Entries 31-25
ACL Logging 31-26
Creating Named MAC Extended ACLs 31-27
Applying a MAC ACL to a Layer 2 Interface 31-29
Configuring VLAN Maps 31-30
VLAN Map Configuration Guidelines 31-30
Creating a VLAN Map 31-31
Examples of ACLs and VLAN Maps 31-32
Applying a VLAN Map to a VLAN 31-34
Using VLAN Maps in Your Network 31-34
Wiring Closet Configuration 31-35
Denying Access to a Server on Another VLAN 31-36
Using VLAN Maps with Router ACLs 31-37
Guidelines 31-37
Examples of Router ACLs and VLAN Maps Applied to VLANs 31-38
ACLs and Switched Packets 31-38
ACLs and Bridged Packets 31-38
ACLs and Routed Packets 31-39
ACLs and Multicast Packets 31-40
Displaying ACL Configuration 31-40
To Next Page
Loading...
