Ciscomotors SNAP 100 - Troubleshooting; Engine Does Not Start or Hard to Start; Engine Lacks Power

Pag.28
8. TROUBLESHOOTING
1. THE ENGENE DOES NOT START OR IS HARD TO START
CHECK POSSIBLE CAUSES SOLUTION
No fuel in tank Fill tank per fueling
Clogged fuel line or fuel filter Replace and clean
Check if fuel is jetting to the
carburettor
Diaphragm fuel pump broken Replace the diaphragm (fig .27)
The engine stop switch is to ON Move it on OFF
Faulty spark plug Replace
Try spark test
Broken or shorted ignition coil Replace
2. ENGINE LACHS POWER
CHECK POSSIBLE CAUSES SOLUTION
Fuel air mixture to lean Turn the screw max out (fig.26
punto 3)
Fuel air mixture to reach Turn the screw max in (fig.26
punto 3)
Clogged fuel line or fuel filter Replace and clean
Check the carburation
Diaphragm fuel pump broken Replace the diaphragm (fig.27)