Ciscomotors SNAP 100 User Manual

Pag.16
DISASSEMBLY PISTON
Fig.11
10. Remove the piston pin clips using a pair of
needle-nose pliers (Fig.11)
11. Press the piston pin out of the piston and
remove the piston.(Fig.12)
Fig.12
Fig.13
12. Spread each piston ring end remove by
lifting it up a point just oppisite the gap (Fig.13)
CAUTION:
do not damage the piston ring by spreading the ends too far.

Ciscomotors SNAP 100 Specifications

General

Brand	Ciscomotors
Model	SNAP 100
Category	Engine
Language	English