EasyManuals Logo

Ciscomotors SNAP 100 User Manual

Ciscomotors SNAP 100
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Pag.3
1. OPERATING INSTRUCTIONS
FUEL
Snap 100 has a two-stroke engine that
requires a gasoline-oil mixture.
Use gasoline with a pump octane
number of 92 or higher .If knocking” or
pinging” occurs, try a different brand of
gasoline or a higher octane grade.
Premix gasoline and oil in a ratio of
40:1. Prepare the fuel mixture in a clean
container fig.1 , and shake until
thoroughly mixed before filling the fuel
tank.
USE A GOOD QUALITY OF
SYNTHETIC 2-STROKE OIL
CAUTION:
To much oil will cause excessive smoking and
spark plug fouling. Too little oil will cause
engine damage or premature wear. Mix fuel
in a ratio of 40 parts gasoline to 1 part oil
(40:1)
Vegetable oils separate from gasoline
more easily than mineral oils, especially
in cold weather. It is advisable to use
synthetic oil.
CAUTION:
Do not mix vegetable and mineral based
oils.
WARNING
Gasoline is extremly flammable and is
explosive under certain conditions.
Perform this operation in a well-
ventilated area with the engine
stopped. Do not smoke or allow flames
or sparks in the area where gasoline is
drained or stores and where the fuel
tank is reflued.
FUEL 92/98 octane Synthetic oil
liters cl
0,5
1
2
3
4
5
10
0,125
0,25
0,50
0,75
10
1,5
25
fig.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ciscomotors SNAP 100 and is the answer not in the manual?

Ciscomotors SNAP 100 Specifications

General IconGeneral
BrandCiscomotors
ModelSNAP 100
CategoryEngine
LanguageEnglish

Related product manuals