Citizen CL-E730 User Manual

48
Chapter 2 Printer Operation
Top Menu Sub Menu Default Menu Remarks
Keyboard Lock O On
O
Prevents a change by a key operation.
Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode
when setting the “On” menu.
LCD Standby O On
O
When the LCD Standby setting is turned
ON, the LCD display will turn o in standby
mode.
Standby Timer 5min 1 to 99min You can set the time it takes for the
machine to go into Standby Mode.
Media Power Up O On
O
Selects whether or not to initiate media
measurement when the power in ON.
CI Lock O On
O
Activates/deactivates the CI command.
Emulation Select
[Emulation Sel]
ZPI2 DM4
DMI
DPP
ZPI2
Selects DataMax®/Zebra® compatibility
DM4: DataMax® 400
DMI: DataMax® IClass
DPP: DataMax® Prodigy Plus®
ZPI2: Zebra® ZPL2®
Emulation Auto
Detect
[Emulation Auto]
Full Auto On
O
Full Auto
Selects the detection of Datamax® and
Detect O Zebra® emulation.
After Print Auto Congure
[Auto Cong]
On On
O
Automatically congures optional devices.
On .....AutoCongure enabled (Regardless
of whether Function Select is set, if
a peeler or cutter is installed, each
mode is set automatically.)
O ....AutoCongure disabled (A peeler of
cutter is installed, but to not operate
the peeler or cutter, turn it O and
the operation is selected by Function
Select.)
Function Select
[Function Sel]
Tear O
Tear
Peel On*
Cut On**
Selects the operation when the
AutoCongure is set to O.
Designates the paper position based on
each option. The operation of this device is
enabled during selection.
At the same time, the parameters of the f
command of Prodigy Plus are emulated for
each optional device.
Cutter Action ** Backfeed Backfeed
Through
Sets the cutter action.
With the optional AutoCongure On,
printing is executed only when the cutter
is installed or only when Cut is selected by
Function Select.
Backfeed is always set after cutting.
Through is set at the rear end of sheets
1 to n-1 when the number of copies = n,
and the rear end of the nal page of single
sheet and the copy is backfeed.
*

Only when peeling option is mounted.
**

Only when cutter is mounted.
Mode Settings
[Zebra® Emulation]

Citizen CL-E730 Specifications

General

Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	300 x 300 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Core diameter	75 mm
Media thickness	0.0635 - 0.254 mm
Maximum media length	4013 mm
Maximum roll diameter	200 mm
Supported paper width	12.5 - 118 mm
Ethernet LAN	Yes
Optional connectivity	Parallel, Serial (RS-232), Wireless LAN
USB 2.0 ports quantity	1
Connectivity technology	Wired
Display	LCD
Product color	Black
LED indicators	Status
Flash memory	16 MB
Internal memory	32 MB
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
AC input voltage	100 - 230 V
Power consumption (standby)	2.9 W
Power consumption (printing)	72 W
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	458 mm
Width	250 mm
Height	261 mm
Weight	11000 g