EasyManuals Logo

Citizen CL-E730 User Manual

Citizen CL-E730
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
49
Chapter 2 Printer Operation
Top Menu Sub Menu Default Menu Remarks
Peel Wait Delay * 0.1 sec 0.1 to 2.0 sec Sets the Peel Wait Delay.
Displays only machines with a peeler
installed.
Paper Position 0.00 inch
0.0 mm
Peel/Cut/Tear O
0.00 to 2.00 inch
0.0 to 50.8 mm
Peel/Cut/Tear On
-1.00 to 1.00 inch
-25.4 to 25.4 mm
Adjusts the stop position. It is based on the
inch/millimeter setting. There are initial
values of the stop position for each device
set above, and later, relative values are set.
Menu Key Action Enters Menu Repeat Last One
Enters Menu
Sets the menu key action.
Repeat Last One:
Last one is issued only for the nal page.
In the case of a count, afterwards, only
last one is issued.
Enters Menu:
Enters the menu setup mode.
Note: Hold down the MENU key for at least
4 seconds in order to enter the Menu Setup
Mode when setting the “Repeat Last One
menu.
Interfaces USB Device Class
[USB Device Clas]
Printer Printer
VCOM
Selects the USB device class.
USB VCOM Protocol
[VCOM Protocol]
Auto Auto
DTR
X-ON
Selects the protocol (ow control) when
operating USB VCOM.
USB 2.0 High Speed
[USB Hi Speed]
On On
O
Enable/disable setting of USB2.0 High
Speed.
When disabled, device runs at Full Speed.
IPv4 Address 169.254.001.010 000.000.000.000 to
255.255.255.255
Set of IPv4 Network Address
IPv4 Subnet Mask
[IPv4 Subnet]
255.255.000.000 000.000.000.000 to
255.255.255.255
Set IPv4 Subnet Mask
IPv4 Gateway 000.000.000.000 000.000.000.000 to
255.255.255.255
Set IPv4 Gateway
IPv4 DHCP On On
O
IPv4 DHCP enable/disable setting
IPv6 On On
O
IPv6 enable/disable setting
*
Only when peeling option is mounted.
Mode Settings
[Zebra® Emulation]

Other manuals for Citizen CL-E730

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Citizen CL-E730 and is the answer not in the manual?

Citizen CL-E730 Specifications

General IconGeneral
ColorNo
Print technologyDirect thermal / Thermal transfer
Maximum resolution300 x 300 DPI
Maximum print height- mm
Maximum printing width104 mm
Core diameter75 mm
Media thickness0.0635 - 0.254 mm
Maximum media length4013 mm
Maximum roll diameter200 mm
Supported paper width12.5 - 118 mm
Ethernet LANYes
Optional connectivityParallel, Serial (RS-232), Wireless LAN
USB 2.0 ports quantity1
Connectivity technologyWired
DisplayLCD
Product colorBlack
LED indicatorsStatus
Flash memory16 MB
Internal memory32 MB
Server operating systems supportedWindows Server 2008 R2, Windows Server 2012
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
AC input voltage100 - 230 V
Power consumption (standby)2.9 W
Power consumption (printing)72 W
Sustainability certificatesENERGY STAR
Harmonized System (HS) code84433210
Weight and Dimensions IconWeight and Dimensions
Depth458 mm
Width250 mm
Height261 mm
Weight11000 g

Related product manuals