Citizen CL-S6621 - Holder, Ribbon Shaft and Holder 2 Tension Spring

Disassembly, Reassembly and Lubrication
CL-S6621 3-22
3-6-7. “Holder, Ribbon Shaft” and “Holder 2 Tension Spring”
1. Open the “Cover Top” Block .
2. Release the lock by moving the part “A” toward the right and remove the “Holder, Ribbon
Shaft” (2 pcs.) toward the front.
3. Remove the 2 screws (PHT (#2), M3x6) and detach the “Holder 2 Tension Spring”.
)
PHT (#2), M3x6
Holder, Ribbon Shaft
Holder, Ribbon Shaft
Holder 2 Tension Spring