Citizen CL-S6621 - Operation of Control Parts; Configuration of Printer

Operation of Control Parts
CL-S6621 2-18
CPU
UPD703111BGJ-13-UEV-A
128MHz
Buzzer
Head Up Switch
[SA, Head Up Switch]
AC Power Supply
PWT20005-* (100V)
PWT20006-* (200V)
S-DRAM (256Mbits)
Control / C.G.
F-ROM (64Mbits)
SA PF Motor
Stepping Moto
r
Driver
Adjustable Paper Sensors
Transparent Sensor
[SA TRA Sen PCB]
Reflective Sensor
[SA Ref Sen PCB]
Thermal Print Head
(203dpi)
[SA, Head]
FPGA
EP2C5F256C8N
Operation Panel
(SWx4/LEDx4)
[SA, Opepane PCB]
(JM66720-*)
RS232C
IEEE1284
USB 2.0
(High Speed)
SA, MAIN PCB (PPS00058-*)
Peel Sensor
(Option) Peeler
Thermal Head Temp. Sensor
[SA, Head]
PF Motor Temp. Sensor
[SA PF Motor]
RS232C
Driver/Receiver
Cutter
Position
Sensor
DC Motor
Driver
(Option)
Auto Cutter
Cutter Moto
r
Ethernet I/F
(Standard type)
(Option)
Interface Board
C.G.
F-ROM (64Mbits)
Cutter Motor
Temp. Sensor
Paper Near End Sensor
[SA PNE Sensor]
Ethernet I/F
(Multi-function type)
Ribbon Sensor F
[SA, Ribbon Sensor]
Ribbon Sensor R
[SA, Ribbon Sensor]
SA Ribbon Motor F
SA Ribbon Motor R
Stepping Moto
r
Driver x 2
SA, Ribbon PCB
(PPS00059-*)
Ribbon Motor Temp. Sensor
[SA Ribbon Motor F]
SA, Relay PCB
(PPS00060-*)
RS232C
USB2.0
Controller
CUTTER PCB
(PPS00065-*)
Wi-Fi I/F
Fan
Fan
Driver
2-2. Operation of Control Parts
2-2-1. Configuration of Printer
The following shows major configuration blocks.