Printable Area
CL-S6621 1-8
1-2. Printable Area
The printable area of the printer is as follows:
When media is set to the printer, it must be aligned with the media guide at the left of the printing
mechanism. Though the available maximum media width is 178 mm (7.01"), there are unprintable
areas on both sides: 2.5 mm (0.10") width is on the left side and 7.5 mm (0.30") width on the right
side as shown below.
The left side unprintable area applies for media of any size.
Maximum media width: 178 mm (7.01")
168 mm (6.61”)
Reference end
Unprintable area
Printable area
Media guide
Direction of media feed
2.5 mm (0.10")
7.5 mm (0.30")
To Next Page
Loading...
