Operation Panel
2-45 CL-S6621
(1-2) Menu setting mode
Set the menu according to your requirements. The following shows the menu settings print
sample. To enter this mode, while pressing and holding the [MODE] key, turn ON the
power. ([MODE] + [POWER]) For details, refer to the User’s Manual.
Machine Information
Model Number : CL-S6621
Boot Version : X.X
ROM Version : EBXXXXXX
ROM Date(DD//MM//YY) : XX/XX/XX
ROM Check Sum : XXXX
FPGA Version : XXXXXXX
Head Check : OK
Print Counter : 0000.068km
Service Counter : 0000.068km
Cut Counter : 0
Sensor Monitor : 2.53V
Option Interface : None
Current Menu Settings
[Global Config Menu]
Config Set : 1
[PageSetup Menu]
Print Speed : 6 IPS
Print Darkness : 10
Darkness Adjust : 00
Print Method : Thermal Transfer
Ribbon Winding : Outside
Continuous Media Length : 4.00 inch
Vertical Position : 0.00 inch
Horizontal Shift : 0.00 inch
Vertical Image Shift : 0.00 inch
Auto Side Shift : 0 dot
Media Sensor : See Through
Small Media Adjustment : Off
Small Media Length : 1.00 inch
Symbol Set : PM
[System Setup Menu]
Sensor Level : 1.7 V
Paper End Level : 2.80 V
Error Reporting : On Printing
Buzzer Select : On
Metric/Inch : Inch
Max Media Length : 10.00 inch
Settings Lock : Off
Keyboard Lock : Off
Standby Mode : Off
Standby Timer : 5 min
Paper Near End Status : On
Paper Near End Alarm : Off
Control Code : STD
Emulation Select : DM4
Emulation Auto Detect : Full Auto
[After Print Menu]
AutoConfigure : On
Function Select : Tear
Cutter Action : Backfeed
Paper Position : 0.00 inch
Mode/Repeat Key : Disabled
Note:
Citizen continually enhances its
printers with new options and
settings based on our customer’s
requests. Extra or changed menu
items may appear on the print out
in some cases.
To Next Page
Loading...
