Adjustable Sensors
CL-S6621 1-10
(Moveable range of the
transparent sensor)
4.8 to 88.9 mm
(0.19 to 3.5")
2.7 to 86.8 mm
(0.11 to 3.42")
(Moveable range of the
reflective sensor)
1-4. Adjustable Sensors
There are two media sensors; the upper sensor (transparent sensor) and the bottom sensor
(reflective sensor). The upper sensor is used to detect the labels on the liner or the U-shaped
notches of tag. The bottom sensor is used to detect the black marks on tag. Also, both sensors are
used to detect media end.
The mechanical adjustable range of both sensors is equal and they are adjusted at the same time
by turning the blue knob (“Gear Bevel Lead Screw U”).
For details about the media sensors, refer to “2-1-3 Label/Tag Detection Mechanism".
Maximum media width: 178 mm (7.01")
168 mm (6.61”)
Media guide
Direction of media feed
2.5 mm
(0.10")
Unprintable area
Unprintable area
Center
Printable area
Media
7.5 mm
(0.30")
To Next Page
Loading...
