Citizen CL-S6621 - Unit, Mechanism; Unit, Mechanism, Unit, Power Supply and Case L

Disassembly, Reassembly and Lubrication
3-31 CL-S6621
3-6-13. “Unit, Mechanism”, “Unit, Power Supply” and “Case L”
(1) Unit, Mechanism
1. Remove the “Case U”. Refer to “3-6-3(1) Removing the “Case U” Block”.
2. Remove the cables from the “SA, Main PCB”. Refer to “
3-6-11 “Unit, Control Panel”, “SA
PNE Sensor”, “SA, Relay PCB” and “SA, Main PCB””.
3. Remove the 3 screws (BH, M3x4 (NI)) and 5 screws (PHT (PT2T), M3x14), and detach the
“Unit, Mechanism” upwardly.
Note on reassembling:
• When you once removed the “Unit Mechanism”, you need to adjust the paper path after
assembling the “Case U” Block.
For details, refer to “
When once the “Unit, Mechanism” was removed (Paper path
adjustment):
1 ” in “3-6-3(1) Removing the “Case U” Block”.
BH, M3x4 (NI)
Unit, Mechanism
PHT (PT2T), M3x14
BH, M3x4 (NI)
PHT (PT2T), M3x14
Unit, Case L