Error Message and Corrective Actions
CL-S6621 4-4
Causes/Corrective Actions PRINT LED CONDITION LED ERROR LED
Abnormal temperature raise of “SA
PF Motor” or “SA Ribbon Motor F”
• Printing will temporarily stop.
Wait until the motor gets cool.
Abnormal temperature raise of auto
cutter (Optional)
• Printing will temporarily stop.
Wait until the auto cutter gets
cool.
OFF
ON
OFF
ON
OFF
Abnormal head resistance
• Due to defective thermal
element:
Printing quality will degrade.
OFF
OFF
ON
OFF
ON
Communication error
• Reception buffer overrun
• Parity or framing error
• Transmission buffer overflow
OFF
OFF
ON
OFF
System error
• Overheat of “SA PF Motor”, “SA
Ribbon Motor F”, “SA, Head” or
the cutter motor (option)
• Overcurrent of “SA PF Motor”
OFF
OFF
ON
OFF
ON
Auto cutter abnormality (Optional)
• Jamming, etc.
OFF OFF
OFF
ON
Paper near end
* By default, issuing a paper near
end alarm is disabled. To enable
it, change the Paper Near End
Alarm submenu under the
“PageSetup” main menu from
Off to On.
ON OFF
OFF
ON
To Next Page
Loading...
