3-5. Disassembly, Reassembly and Lubrication
CLP-621 & CLP-631 3-20
CN7
CN6
CN8
CN10
CN9
CN21
CN4
CN12
CN5
BH, M4x4 (NI)
PHT (BH2T), M3x8
EXT. T, 4 (NI)
PHT (BH2T), M3x8
Front
Cable, Ope-pane
Unit, Control Panel
(Black)
(Violet)
(Black)
Cushion, Ope-pane Cable
[Front View]
Unit, Power Supply
(Main PCB Block)
SA, Power Cable
Cable, Ope-pane
SA, Core
(Hook)
BH (N), M3x6
EXT. T, 3 (NI)
A
A
Notes on reassembling:
• When running the Ope-pane Cable, pass it inner side
of the case arms “A”.
• When connecting the flexible cables, be sure that the
insertion direction is correct. If you insert it reversely,
circuit is not electrically connected.
• When attaching the earth wire of the Power Supply
Unit to the Mechanism Unit, be sure that the earth lug
is assembled in the horizontal direction as shown in
the figure.
• Media-path left-edge alignment:
Assemble the Mechanism Unit so that the media
guide end of the Head Wire Cover is aligned with the
chassis plate of the Main PCB Block.
To Next Page
Loading...
