Citizen PMU2300III Series

PMU2300III Series Service Manual
- 18 -
3. Remove two “Screw, PHT (ST), M3 × 6” and remove “PLATE PRINTER” from “UNIT,
MECHANISM”.
3. Removing “AUTO CUTTER”
1. Remove two “SCREW, No. 00, TFH (ST), M3 × 6 (Thin head)” from both sides.
2. Remove “AUTO CUTTER” while pulling “CUTTER BK” outwardly.
* Be careful not to deform “Cutter BK” by pulling it excessively outward.
When reassembling, insert the lugs
at “PLATE PRINTER” into the
notches at “UNIT, MECHANISM”.
Screw, PHT (ST), M3 × 6
PLATE PRINTER
AUTO CUTTER
CUTTER BK
SCREW, No.00, TFH (ST), M3 × 6 (Thin head)
Hook
Hook
* When reassembling,
hang the cable to the
hook.
When reassembling,
align the bosses with
the grooves.