Citizen PMU2300III Series

PMU2300III Series Service Manual
- 19 -
4. Removing “CUTTER BK”
1. Remove two “SCREW, PHT (BT), M2 × 6”, and remove “CUTTER BK” from “UNIT,
MECHANISM”.
5. Disassembling “UNIT, Guide Paper Rear”
1. Remove two “Screw, PHT (ST), M3 × 6” and remove “Stopper Paper Roller Spring” and “SA,
Spring Paper Roller” from “Guide Paper Rear”.
SCREW, PHT (BT), M3 × 6
CUTTER BK
When reassembling, secure
“Stopper Paper Roller Spring”
at the u
pp
er
p
osition.
When reassembling, align the holes at
“SA, Spring Paper Roller” with the
bosses at “Guide Pa
p
er Rea
r
”.
Screw, PHT (ST), M3 × 6
Stopper Paper Roller Spring
SA, Spring Paper Roller
Guide Paper Rear