© 1999-2017 Citrix Systems, Inc. All rights reserved. p.342https://docs.citrix.com
This is the default group that is chosen when the authentication succeeds in addition to extracted groups
group_separator
Group separator string that delimits group names within a RADIUS attribute for RADIUS group extraction
pass_encoding
Enable password encoding in RADIUS packets send to the RADIUS server
radius_key
Key of radius server
enable_nas_ip
Enable NAS IP extraction
groups_prefix
Prefix string that precedes group names within a RADIUS attribute for RADIUS group extraction
Top
add radiusserver
Synopsis
add radiusserver ip_address=<ipaddress> name=<string> radius_key=<stringx> [port=<int>] [ip_vendor_id=<int>]
[ip_attribute_type=<int>] [nas_id=<string>] [auth_timeout=<int>] [pwd_attribute_type=<int>] [accounting=(false | true)]
[group_vendor_id=<int>] [group_attribute_type=<int>] [pwd_vendor_id=<int>] [default_authentication_group=<string>]
[group_separator=<string>] [pass_encoding=<string>] [enable_nas_ip=(false | true)] [groups_prefix=<string>]
Description
Use this operation to add Radius server
Parameters
ip_address
IP Address of radius server
This is a mandatory parameter.
name
Name of radius server
This is a mandatory parameter.
radius_key
Key of radius server
This is a mandatory parameter.
port
Port number of radius server
To Next Page
Loading...
Need help?
General
