© 1999-2017 Citrix Systems, Inc. All rights reserved. p.7https://docs.citrix.com
Hardware Installation
Jan 21, 2016
All NetScaler SDX appliances share common components, but different platforms have different additional components.
Therefore, installation requirements can vary among platforms. Before installation, make sure that your site is suitable for
your appliance and that you have completed all necessary preparations. T his is also the time to read the cautions and
warnings. You are then ready to mount the appliance in a rack, connect it, and start it up. For initial configuration, you can
connect a computer to the appliance's network or to its serial-console port. After initial configuration, you can configure
the Lights Out Management port, so that you have management access to the appliance even if your network goes down.
The Citrix NetScaler SDX appliance is a multi-tenant platform on which you can provision and manage multiple virtual
instances of a NetScaler appliance.
To Next Page
Loading...
Need help?
General
