© 1999-2017 Citrix Systems, Inc. All rights reserved. p.424https://docs.citrix.com
hostinterface
Sep 10, 2014
XenServer Interface
[ show | set | custom ]
show hostinterface
Synopsis
show hostinterface [id=<string>]
Description
Use this operation to get interface/channel
Parameters
id
Id is system generated key
Top
set hostinterface
Synopsis
set hostinterface mapped_port=<string> [mtu=<int>] [port=<string>] [apply_mac_address=(false | true)] [range=<string>]
[base_mac_address=<string>] [add_mac_address=(false | true)] [interface_type=<string>] [flow_control_tx=(false | true)]
[adv_auto_neg=(false | true)] [speed=<string>] [cpu_socket=<string>] [flow_control_rx=(false | true)] [state=<string>]
[flow_control_auto_neg=(false | true)] [act_id=<string>] [device_name=<string>] [port_type=<string>] [duplex=<string>]
Description
Use this operation to modify interface/channel
Parameters
mapped_port
Mapped Port Name Ex: eth0
This is a mandatory parameter.
mtu
MTU value, should be between 1500-9126
port
Port Name Ex: 10/1
apply_mac_address
Apply Mac Address
To Next Page
Loading...
