© 1999-2017 Citrix Systems, Inc. All rights reserved. p.419https://docs.citrix.com
If true then all the member interfaces of this channel are tagged. Possible values: true and false
channel_type
Channel type if this interface represents a channel (LACP or Static)
lacp_channel_time
LACP time. Possible values: SHORT and LONG
channel_bandwidth_high
Higher end threshold of the channel bandwidth usage in Mbps
channel_ha_monitoring
HA-monitoring control for the channel. Possible values: true and false
channel_throughput
Minimum required throughput in Mbps for this channel
channel_bandwidth_normal
Lower end threshold of the channel bandwidth usage in Mbps
channel_interface_list
Comma separated list of interfaces that are part of this channel if this interface represents a channel (10/1, 10/4)
Top
set channel
Synopsis
set channel channel_id=<string> [mtu=<int>] [static_channel_state=(false | true)] [channel_alias=<string>] [state=<string>]
[channel_tag_all_vlans=(false | true)] [channel_type=<string>] [lacp_channel_time=<string>] [channel_bandwidth_high=
<int>] [channel_ha_monitoring=(false | true)] [channel_throughput=<int>] [channel_bandwidth_normal=<int>]
[channel_interface_list=<string...>]
Description
Use this operation to modify channel
Parameters
channel_id
Channel ID if this interface represents a channel (LA/1, LA/2 ...)
This is a mandatory parameter.
mtu
MTU value, should be between 1500-9126
static_channel_state
Static channel state (Enabled/Disabled)
channel_alias
To Next Page
Loading...
Need help?
General
