© 1999-2017 Citrix Systems, Inc. All rights reserved. p.420https://docs.citrix.com
Alias name for this channel
state
State of the port.
channel_tag_all_vlans
If true then all the member interfaces of this channel are tagged. Possible values: true and false
channel_type
Channel type if this interface represents a channel (LACP or Static)
lacp_channel_time
LACP time. Possible values: SHORT and LONG
channel_bandwidth_high
Higher end threshold of the channel bandwidth usage in Mbps
channel_ha_monitoring
HA-monitoring control for the channel. Possible values: true and false
channel_throughput
Minimum required throughput in Mbps for this channel
channel_bandwidth_normal
Lower end threshold of the channel bandwidth usage in Mbps
channel_interface_list
Comma separated list of interfaces that are part of this channel if this interface represents a channel (10/1, 10/4)
Top
add channel
Synopsis
add channel static_channel_state=(false | true) channel_id=<string> channel_type=<string> channel_interface_list=
<string...> [mtu=<int>] [channel_alias=<string>] [state=<string>] [channel_tag_all_vlans=(false | true)] [lacp_channel_time=
<string>] [channel_bandwidth_high=<int>] [channel_ha_monitoring=(false | true)] [channel_throughput=<int>]
[channel_bandwidth_normal=<int>]
Description
Use this operation to create channel
Parameters
static_channel_state
Static channel state (Enabled/Disabled)
This is a mandatory parameter.
channel_id
To Next Page
Loading...
