© 1999-2017 Citrix Systems, Inc. All rights reserved. p.89https://docs.citrix.com
The maximum number of instances that you can set up on the SDX appliance, based on the installed license.
Available Instances (Shared)
The number of instances that can be configured depending on the number of CPU cores that are still available.
Maximum Throughput (Mbps)
The maximum throughput that can be achieved on the appliance, based on the installed license.
Available Throughput (Mbps)
The available throughput based on the installed license.
System Inf ormation
Platf orm
Model number of the hardware platform.
Product
Type of NetScaler product.
Build
NetScaler release and build running on the SDX appliance.
IP Address
IP address of the Management Service.
Host ID
XenServer host ID.
System ID
XenServer system ID.
Serial Number
XenServer serial number.
System Time
System time displayed in Day Month Date Hours:Min:Sec T imezone Year format.
Uptime
Time since the Management Service was last restarted, in number of days, hours, and minutes.
BIOS version
BIOS version.
Viewing Real-Time Appliance Throughput
The total throughput of the SDX appliance for incoming and outgoing traffic is plotted in real time in a graph that is
updated at regular intervals. By default, throughputs for both incoming and outgoing traffic are plotted together on the
graph.
To view the throughput of the SDX appliance, on the NetScaler GUI click Dashboard and check System Throughput
(Mbps).
Viewing Real-Time CPU and Memory Usage
You can view a graph of CPU and memory usage of the appliance. The graph is plotted in real time and updated at regular
intervals.
To view the CPU and memory usage of the SDX appliance, on the NetScaler GUI click Dashboard and check Management
Service Statistics.
To Next Page
Loading...
Need help?
General
