115
3
Ease of use and comfort
Jumpy_en_Chap03_ergonomie-et-confort_ed01-2016
F Lock the front feet using the handles.
F Unfold the seat toward the rear until the
rear feet lock into place.
Be aware of the feet of passengers when
refitting a seat.
Ensure that no object, or the feet of a
passenger seated at the rear, could
obstruct the anchorage points or prevent
the correct latching of the assembly.
F
If fitted to your vehicle, pull the
control to raise the backrest (from
the rear, lower the lever).
The seats (or bench seats) are not
designed for any use other than in the
vehicle. They have mechanisms and
functions that could be damaged if used
incorrectly or are if the seat is dropped.
If removing and storing a seat (or bench
seat) out of the vehicle, ensure that it is
placed in a clean area, so as to avoid
introducing any foreign bodies into the
mechanisms.
Refitting a seat
(example of an individual seat)
F Check that there is no object obstructing
the anchorages and preventing the feet
locking into place.
F
Engage the front feet in the anchorages on
the floor (as shown above).
Check that the seat has locked into place on the
floor when returning it to the seating position.
To Next Page
Loading...
