233
6
Driving
Jumpy_en_Chap06_conduite_ed01-2016
If your vehicle has a manual gearbox, third or
fourth gear, or higher, must be engaged.
If your vehicle has an automatic or electronic
gearbox, second gear or higher must be
engaged.
6.
Cruise control pause/resume indication.
7. Cruise control mode selection indication.
8. Speed value setting.
Display in the instrument panel
Head-up display
Switching on
F Turn thumbwheel 1 to the "CRUISE"
position: the cruise control mode is
selected but is not switched on (Pause).
F
Press on button 2 or 3: your vehicle's
current speed becomes the cruise speed.
The cruise control is activated (ON).
It is possible to exceed the programmed
speed temporarily by pressing the
accelerator pedal.
To return to the programmed speed,
simply release the accelerator pedal
until the programmed cruise speed is
reached again.
The cruise control is switched on manually: it
requires a minimum vehicle speed of 25 mph
(40 km/h).
To Next Page
Loading...
