234
Driving
Jumpy_en_Chap06_conduite_ed01-2016
Pause
The cruise control is paused manually or
by pressing the brake or clutch pedal or
on triggering of the ESC system for safety
reasons.
-
by pressing on button 5, if your vehicle is
equipped with speed memorisation:
F the speed to be memorised is displayed
in the instrument panel,
F press on button 5 again to save the
speed.
The value is then displayed in the instrument
panel.
Once switched on, you can pause the cruise
control at any time by pressing button 4: the
screen confirms the pause.
If the cruise control is switched on, you can
then modify the initial speed in one of the
following ways:
-
using buttons 2 or 3:
F
by successive short presses, to modify
the speed by + or - 1 mph (km/h),
F by a long press, to modify the speed in
steps of + or - 5 mph (km/h),
Modification of the initial
speed setting
- by pressing on button 5, if your vehicle is
equipped with speed memorisation:
F the six memorised speeds are displayed
in the touch screen,
F select a value: it is displayed in the
instrument panel.
The selection screen closes after a few
moments.
The modification is then accepted.
For more information on Speed limit
recognition, refer to the corresponding
section.
To Next Page
Loading...
