245
6
Driving
Jumpy_en_Chap06_conduite_ed01-2016
This level of alert is based on the time before
collision. It takes account of the vehicle
dynamics, the speed of your vehicle and the
one in front, the environmental conditions, the
operation of the vehicle (cornering, pedals
pressed, etc.) to trigger the alert at the best
moment.
Level 2: visual and audible alert,
warning you that a collision is
imminent.
A message indicating that you should
brake is displayed.
Where the speed of your vehicle is too
high approaching another vehicle, the
first level of alert may not be displayed:
the level 2 alert may be displayed
directly.
Furthermore, the level 1 alert is never
displayed with the "Close" threshold.
Poor weather conditions (very heavy
rain, accumulation of snow in front of
the radar and the camera) may hinder
the operation of the system, with the
display of an operating fault message.
The system remains out of service until
the message disappears.
Programming the alert
thresholds
The thresholds for triggering an alert determine
how you wish to be warned of the presence of a
vehicle moving or stationary ahead of you, or a
pedestrian in your traffic lane.
You can select one of three thresholds:
-
"Distant", to be warned early (cautious
driving).
- "Normal".
-
"Close", to be warned later.
In the vehicle settings menu, activate/
deactivate "Collision risk alert and automatic
braking".
With the touch screen
With the audio system
In the "Personalisation-configuration"
menu, activate/deactivate "Auto. emergency
braking".
Then modify the alert threshold.
Then modify the alert threshold.
Press on "Confirm" to save the change.
To Next Page
Loading...
