302
In the event of a breakdown
Jumpy_en_Chap08_En-cas-de-panne_ed01-2016
F If your vehicle is so equipped, tighten the
security bolt using the wheelbrace 1 fitted
with the security socket 4.
F
Tighten the other bolts using the
wheelbrace 1 only.
F Stow the tools in the tool box.
The tyre inflation pressures are given on this
label.
After changing a wheel
Stow the punctured wheel in the carrier.
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
If your vehicle has tyre under-inflation
detection, check the tyre pressures and
reinitialise the system.
Tyre under-ination
detection
The steel spare wheel does not have a
sensor.
Wheel with wheel trim
When refitting the wheel, refit the
wheel trim by placing its cut-out at the
valve, and press round its edge with the
palm of your hand.
For more information on Under-
inflation detection, refer to the
corresponding section.
To Next Page
Loading...
