301
8
In the event of a breakdown
Jumpy_en_Chap08_En-cas-de-panne_ed01-2016
Fitting a wheel
F Put the wheel in place on the hub.
F
Screw in the bolts fully by hand.
F
If your vehicle is so equipped, pre-tighten
the security bolt using the wheelbrace 1
fitted with the security socket 4.
F
Pre-tighten the other bolts using the
wheelbrace 1 only.
F
Lower the vehicle fully.
F
Fold the jack 2 and detach it.
To Next Page
Loading...
