300
In the event of a breakdown
Jumpy_en_Chap08_En-cas-de-panne_ed01-2016
Ensure that the jack is stable. If the ground is slippery or loose, the jack may slip or drop -
Risk of injury!
Ensure that the jack is positioned only at one of the jacking points A or B under the vehicle,
making sure that the vehicle's contact surface is centred on the head of the jack. Otherwise
there is a risk of damage to the vehicle and/or of the jack dropping - Risk of injury!
F
Remove the bolts and store them in a clean
place.
F Remove the wheel.
F Extend the jack 2, using the hand wheel, until its head comes into contact with the jacking
point
A or B used, with the contact surface A or B on the vehicle correctly engaged with the
central part of the head of the jack.
F
Raise the vehicle using the wheelbrace 1, until there is sufficient space between the wheel and
the ground to admit the spare (not punctured) wheel easily.
To Next Page
Loading...
