311
8
In the event of a breakdown
Jumpy_en_Chap08_En-cas-de-panne_ed01-2016
Number plate lamps
(side-hinged doors)
Type A, W5W-5W
F Remove the plastic cover using a small
screwdriver.
F Using a screwdriver through the aperture,
push the lamp towards the outside.
F Disconnect the electrical connector.
F
Remove the lamp.
F
Turn the bulb holder a quarter turn anti-
clockwise.
F Change the failed bulb.
To refit, press on the lamp to clip it in place.
Third brake lamp
(side-hinged doors)
Type A, W5W-5W
To refit, press on the lens to clip it in place.
F Open the left hand rear door. F Insert a thin screwdriver into one of the cut-
outs in the lens.
F Push it outwards to unclip it.
F
Remove the lens.
F
Change the failed bulb.
To Next Page
Loading...
