82
Access
Jumpy_en_Chap02_ouvertures_ed01-2016
The remote controls buttons are not
active with the ignition switched on.
Closing
From outside
F To start the electrically powered opening
of the door, press the button for the
corresponding door.
F
Pressing the button again reverses the
movement of the door.
Using the button(s) at the front
The button is not operational and
pressing it results in an audible signal,
if the speed of the vehicle is above
20
mph (30 km/h).
From inside
Using the remote control
F Press and hold this button until
the sliding door has closed.
F
Press this button again to
reverse the movement of the
door.
Using the handle
F Pull and release the handle to start the
electrically powered opening of the door.
F Pull the handle again to reverse the
movement of the door.