83
2
Access
Jumpy_en_Chap02_ouvertures_ed01-2016
F To start the electrically powered opening
of a door, press the button for the
corresponding door.
F
Pressing the button again reverses the
movement of the door.
Using the button(s) on the door
pillar
The button is not operational and
pressing it results in an audible signal,
if the speed of the vehicle is above
20
mph (30 km/h).
If a sliding door is not fully closed:
-
vehicle stationary and engine
running, this warning lamp comes
on, accompanied by an alert
message for a few seconds,
- vehicle moving (speed above
6 mph (10 km/h)), this warning
lamp comes on, accompanied
by an audible signal and an alert
message for a few seconds.
To Next Page
Loading...
