ENGINE
98
Checking the valve timing (continued)
WARNING : If the pegs do not engage without effort, restart the fitting and tensioning of the timing belt
(see below).
Setting the valve timing
Remove
- Remove the screws (2), the pulley (1), upper valve cover (4), lower valve cover (3).
- Turn the engine by the screw (13) of the pinion (12) to bring it to pegging position.
- Peg the pulleys (8) and (9) using tools [1].
- Peg the pinion (12) using tool [2].
- Loosen the screw (7) of the tensioner roller (6).
- Turn the tensioner roller (6) (clockwise).
- Remove the timing belt (10).
CHECKING AND SETTING THE VALVE TIMING
Engine : RFN
B1EP14JDB1BP23XC
To Next Page
Loading...
