CITROEN SYNERGIE - Setting the Valve Timing (Cont); Checking the Belt Tension

ENGINE
91
CHECKING AND SETTING THE VALVE TIMING
Engines : LFY - RFV # 11/97 (continued)
SETTING THE VALVE TIMING (Cont.)
- Rotate the crankshaft by 2 turns.
- Peg the crankshaft at (2).
- Loosen the screws (4).
- Peg the hubs of pulleys (7) et (8) at (3).
(If necessary, turn the camshaft using the screw (5)).
- Tighten the screws (4) to 1 m.daN.
- Remove the pegs.
CHECKING THE BELT TENSION
- Rotate the crankshaft by 1/4 turn to align the locating peg hole (2) of the pulley (13), with the screw (14).
(Do not turn backwards).
- The tension measurements must be between:
If the measurements are different, repeat the tensioning procedure.
B1EP08KCB1EP08XC
Engines LFY - RFV
36
±4 SEEM unitsNew belt