CITROEN SYNERGIE - Auxiliary Equipment Drive Belt: XM (Engine THY with Air Conditioning)

ENGINE
76
XM
AUXILIARY EQUIPMENT DRIVE BELT
Engine : THY
With air conditioning
WORN BELT.
- Loosen the screw (2) using tool [2] 5714-T.R (6 mm across the flats).
- Move the roller (3), using tool [3] 5714-T.S (6 mm across the flats) until tool [1] 5714 - T.Q.
(Ø 4 mm) fits in the hole (5) of the automatic tensioner (4).
NOTE :If there is insufficient roller movement (3), move the tensioner (4) using a ratchet wrench (9.52 mm) plus
extension, so that the tool [1] (Ø 4 mm) fits in the hole (5).
- Remove the belt.
BROKEN BELT.
- Move the tensioner (4) using a ratchet wrench (9.52 mm) plus extension so that the tool [1] 5714-T.Q (Ø 4 mm)
fits in the hole (5).
B1BP051C B1BP052C