CITROEN SYNERGIE - Handbrake - Synergie

BRAKES
249
B3FP10WCB3FP10VC
HANDBRAKE
SYNERGIE
- Slacken the cables using the nut (1).
- Remove the blanking plug from hole A.
- Position hole A opposite the toothed wheel (adjusting mechanism).
- Turn the toothed wheel using a flat screwdriver until the disc locks.
- LH side upwards.
- RH side downwards.
- Unlock the disc by turning in the opposite direction by 6 notches.
- Position the blade B of the blanking plug perpendicular to the line pas-
sing through the centre of the disc and the centre of the hole. Tighten
the nut (1) to obtain a handbrake lever travel of 4 to 5 notches.
- Tighten the lock nut (2).
B3FP10XC