CITROEN SYNERGIE - Auxiliary Equipment Drive Belt: Xantia

ENGINE
70
XANTIA
AUXILIARY EQUIPMENT DRIVE BELT
Engines : DHX
With air conditioning
- Loosen the screws (1).
- Tighten or loosen the screw (2) until holes «a» and «b» are superimposed.
- Locate the peg [1] : (in the hole «a»).
DHX peg 7019-T.
- Tighten the screw (2) until it stops..
- Loosen the screw (2), so the peg [1] can be removed.
- Tighten the screws (1) to 2 m.daN.
B1BP1HHC