CITROEN SYNERGIE - Handbrake - XM; Parking Brake

B3FP10SD
BRAKES
244
HANDBRAKE
XM
adjustment
- Apply the main brake pedal so that the brake pads
are in contact with the brake discs, release the
pressure.
- Set the handle (5) to the locked position.
- Press the pedal (6) to the 4th notch of the
quadrant.
- Turn the nuts (2) to obtain an equaliser (3) balance
to within 1.5 mm.
- Unlock the handle (5), the pedal should return to
its rest position.
- The levers (1), should not be pulled by the cables,
whatever the steering angle and height of the
vehicle.
- Tighten the lock nuts to 2 m.daN.
- Apply the parking brake several times, ensuring it
returns to its rest position.
- The pedal should be between the 6th and 12th
notch of the quadrant.