CITROEN SYNERGIE - Water Pump Belt: XM (Engine - THY)

ENGINE
82
XM
WATER PUMP BELT
Engine : THY
Removal
- Loosen the screw (19).
- Turn the screw (20) in the same direction as if tightening in order to slacken the belt.
- Remove the belt (21).
Refitting
- Refit the belt (21).
- Fit the measuring instrument [2] 4122-T to the belt.
- Loosen the screw (20) to tighten the belt.
•
NEW belt = 46 SEEM units.
•
Reused belt = 38 SEEM units.
- Remove the tool [2].
- Rotate the crankshaft by 3 turns (direction of rotation).
- Fit the tool [2].
- Check the belt tension:
•
NEW belt = 46 SEEM units.
•
Reused belt = 38 SEEM units.
- Retighten the screw (19).
- Remove the tool [2].
B1GP016C