CITROEN SYNERGIE - Page 124

CHECKING AND SETTING THE VALVE TIMING
Engine : THY (continued)
CHECKING THE VALVE TIMING
- Peg the camshaft pulley (1).
- Peg the injection pump pulley (3).
- Fit the tool 4099-T or 4122-T.
- Tension using the tool 5711-T.E to obtain a value of :
• New belt : 58 SEEM units
• Reused belt : 51 SEEM units
- Tighten the tensioner roller (7) to 4.5 m.daN.
- Tighten the screws (2) and (4) to 2.5 m.daN.
- Remove the tools.
- Rotate the engine by 2 turns.
- Check the setting.
B1EP11KC
ENGINE
117