203
CLUTCH
GEARBOX
DRIVESHAFTS
RECOMMENDATIONS - PRECAUTIONS : 4 HP 20 AUTOMATIC GEARBOX
Engine : XFZ
Checking the oil level (continued)
Flowing of oil from the oil filler aperture.
- As soon as the oil temperature reaches 60°C ± 1°C, refit the oil filler plug (*).
Note : The oil level is correct.
No flowing of oil from the oil filler aperture.
- Refit the oil filler plug (3).
- Stop the engine.
- Remove the air vent assembly (1) and (2) from the gearbox; using tool [1].
- Add 0.5 litre of additional oil into the gearbox; using tool [2].
- Repeat the procedure of topping up the oil.
- Remove the tools [2] and [3].
- Refit the metallic part (1) of the air vent assembly, using a Ø 18 mm drift and a mallet.
- Clip on the plastic part (2) of the air vent assembly.
- Refit the air filter housing.
(*) Note : The method of topping up gearbox oil with an oil gauge remains unchanged.
B2CP3ABCB2CP3ACD
XANTIA- XM
To Next Page
Loading...
