ENGINE
65
AUXILIARY EQUIPMENT DRIVE BELT XANTIA - XM
- Loosen :
- The screws (4) of the tensioner roller (13 mm angle spanner).
- The screw (3).
- Tension the belt using the screw (3) to obtain :
- New belt : 120 SEEM units.
- Reused belt : 90 SEEM units.
- Tighten the screws (4) to 2 m.daN.
- Rotate the crankshaft by 4 turns (direction of rotation).
- Adjust the belt tension (if necessary).
With air conditioning
B1EP05FC
Engines : BFZ - LFX - LFY - RFV - RGX (Continued)
To Next Page
Loading...
