Claas LINER 3000 User Manual

Hydraulic / Electric System CORTO 8100 F/T TIC
3-10 10/04
2.0 CORTO 8100 T
2.1 Hydraulic System
CORTO 8100 T
2.1.1 Key to diagram
2 Tractor hydraulic system pump
5 Tractor return line oil filter
50 4/3 way valve, double-acting tractor control unit
70 3/3 way valve, single-acting tractor control unit
72 Pressure relief valve 60 bar, left CORTO drive On/Off
73 Pressure relief valve 60 bar, right CORTO drive On/Off
74 Oil accumulator for Contour device
77 Right CORTO hydraulic cylinder, drive On/Off
78 Left CORTO hydraulic cylinder, drive On/Off
79 80 bar oil pressure switch
80 100 bar pressure relief valve, double-acting
81 Non-return valve, left
82 Hydraulic cylinder, left CORTO, starting protection
83 Pressure relief valve 180 bar
84 Non-return valve, right
85 Hydraulic cylinder, right CORTO, starting protection
86 Pressure relief valve 180 bar
87 Pressure gauge, CORTO right-hand load relief
88 Accumulator, right-hand, pre-loaded to 210 bar
89 Lock-up valve unit on right side, electro-magnetic control
(open when deenergized)
90 Hydraulic cylinder, raise and/or load relief of right CORTO
91 Hydraulic cylinder, fold left CORTO in and out
92 Hydraulic cylinder, fold right CORTO in and out
93 160 bar oil pressure switch
94 30 bar oil pressure switch
95 Centre mower unit raise/lower hydraulic cylinder
96 Lock-up valve unit on left side, electro-magnetic control
(open when deenergized)
97 Pressure gauge, CORTO left-hand load relief
98 Accumulator, left-hand, pre-loaded to 210 bar
99 Lock-up valve unit, oil flow from B to A is possible when deenergized.
100 Hydraulic cylinder, raise and/or load relief of left CORTO
101 Lock-up valve unit, oil flow from B to A is possible when deenergized.
102 Right lock-up valve unit, drive On/Off
103 Left lock-up valve unit, drive On/Off

Claas LINER 3000 Specifications

General

Brand	Claas
Model	LINER 3000
Category	Farm Equipment
Language	English